Camera online web xxx

Posted by / 02-Oct-2020 04:48

The problem with this is that it’s likely that this address will change next time turn off and then back on the router or camera.

The first step is to set a fixed address on the camera so that it doesn’t change and you can always find it.

For example, if you have 3 cameras, you can use 10001, 1003.

From that point on, since port 80 is the default, you must specify the port number after the IP address separated by a colon when accessing the camera, for example if you used 10002, you will use to view the camera from your browser at home.

In the DOS window, enter the command “ipconfig”, on a MAC enter the command “ifconfig”.

You will see the IPv4 address, the subnet mask and the default gateway.

This can only either start with 192.168 or 10…, so you know you are using an internal address if it starts with this.

STEP 1 There’s several steps into making this work, so it’s best to start at the camera.If it works you can use this to access your camera from anywhere in the world with one caveat, it may only last a few hours or at best a few days, so onto to the last step in the process.STEP 4 Service providers have many, many customers and it would be very expensive to give each and every one of us a fixed IP address as you did with your camera in step 1.By default, most IP cameras are assigned a temporary IP address by your router.This is composed of 4 numbers from zero to 255 that are separated by periods that is how you find your camera.

Camera online web xxx-23Camera online web xxx-4Camera online web xxx-31

You do this by going into the firewall configuration screen (sometimes called a Port Forward screen or Application & Gaming) and tell it which IP addresses can be accessed and what port number they are using.

One thought on “Camera online web xxx”